-
Clamp № W2-TOR V M -Russia
PREMOLAR CLAMPS
(wingless clamp with flat horizontal “jaws”, for small premolars)
225 EGP -
Clamp № 212-TOR V M -Russia
ANTERIOR CLAMPS
(“butterfly” clamp by Ferrier with the effect of mechanical gingival retraction, for restoration of cervical areas of tooth facial surfaces)
225 EGP -
Clamp № B6 Brinker Clamp-TOR V M -Russia
BRINKER CLAMPS (TISSUE RETRACTORS)
(Brinker “butterfly” clamp with wide “jaws” (for upper and lower anteriors))
225 EGP -
Clamp № B5 Brinker Clamp-TOR V M -Russia
BRINKER CLAMPS (TISSUE RETRACTORS)
(Brinker “butterfly” clamp with narrow “jaws” (for V class restorations))
225 EGP -
Clamp № B4 Brinker Clamp-TOR V M -Russia
BRINKER CLAMPS (TISSUE RETRACTORS)
(for anteriors (incisors and canines))
225 EGP -
Clamp № B3 Brinker Clamp-TOR V M -Russia
BRINKER CLAMPS (TISSUE RETRACTORS)
(for right-side upper molars)
225 EGP -
Clamp № B2 Brinker Clamp-TOR V M -Russia
BRINKER CLAMPS (TISSUE RETRACTORS)
(for left-side upper molars)
225 EGP -
Clamp № B1 Brinker Clamp-TOR V M – Russia
BRINKER CLAMPS (TISSUE RETRACTORS)
(for lower molars)
225 EGP -
MPro Niti Files (3 Files System) 31mm Long File-IMD-China
Easy, Safe and Efficient
370 EGP -
MPro Niti Files (3 Files System)-IMD-China
Easy, Safe and Efficient
370 EGP -
M-Pro Smart Kit-IMD-China
M-Pro (Opener ,04 20, 06 25, 04 35)
Path File (10 03, 15 03)
370 EGP -
MM Niti Files-IMD-China
Advantages Of MM Niti Files
- The length is only 16mm and suitable for deciduous teeth preparation.
- The standardized taper with obturation by standard gutta purcha point.
Key Work Steps Of MM Niti Files
- Enable creation of a smooth glide path and determine the working length by hand used k file #10.
- Use MM file .04 taper #20, #25 and #30 to finish the preparation.
Attention: the root canal wall of the deciduous teeth is very thin, no need to cut too much.
370 EGP -
ReRoot Niti Files-IMD-China
- Effective removal of filling material
- With sharp cutting edge is able to remove filling material easily
- Non-cutting guide tip
370 EGP -
Kenda Planus-KENDA Polishers-Swiss
2-step smoothing & polishing system for acrylic dentures.
6Pcs
130 EGP -
Kenda Zircovis-KENDA Polishers-Swiss
2-step diamond polishing system for all oxide & Silicate Ceramics – optimized for Zirconia
380 EGP -
Kenda C.G.I.-KENDA Polishers-Swiss
3-step polishing system for universal composites, compomers and glass-ionomers.
7 PCS370 EGP -
Kenda Nobilis-KENDA Polishers-Swiss
1-step diamond polishing system for composite restorations and ceramics.
820 EGP -
Reveal® HD Bulk A3- Bisco-USA
Light-Cured Bulk Fill Composite
REVEAL HD Bulk is BISCO’s new light-cured bulk fill restorative composite, optimized for simpler and faster posterior restorations. REVEAL HD Bulk combines appropriate handling, depth of cure, and polishability, allowing clinicians to provide patients with functional and esthetic composites while saving valuable chair time.
Thanks to its HD Filler Technology, REVEAL HD Bulk allows for layering increments in 5-6 mm due to its predictable depth of cure. BISCO has perfected a filler-resin system refractive index for superior light transmission, which means light can be effectively refracted and distributed through the material, allowing for optimized depth of cure. The category-leading depth of cure allows for a strong restoration from the top-down so you can place the composite in a single-layer without the need for additional layers or placing a base/liner.
Unique Benefits
- Category-leading depth of cure (5-6 mm increments)*
- Exceptional radiopacity (4.0 mm Al)
- Superior compressive strength (370 MPa)
- Optimized handling and polishability via HD Filler Technology
Clinical Significance
- Allows for single-layer bulk-filling technique –Saves time and money
- Handling and non-stickiness makes placement easy, while ensuring voids are filled
* Varies based on the shade selected.
575 EGP -
Reveal® HD Bulk A2-Bisco-USA
Light-Cured Bulk Fill Composite
REVEAL HD Bulk is BISCO’s new light-cured bulk fill restorative composite, optimized for simpler and faster posterior restorations. REVEAL HD Bulk combines appropriate handling, depth of cure, and polishability, allowing clinicians to provide patients with functional and esthetic composites while saving valuable chair time.
Thanks to its HD Filler Technology, REVEAL HD Bulk allows for layering increments in 5-6 mm due to its predictable depth of cure. BISCO has perfected a filler-resin system refractive index for superior light transmission, which means light can be effectively refracted and distributed through the material, allowing for optimized depth of cure. The category-leading depth of cure allows for a strong restoration from the top-down so you can place the composite in a single-layer without the need for additional layers or placing a base/liner.
Unique Benefits
- Category-leading depth of cure (5-6 mm increments)*
- Exceptional radiopacity (4.0 mm Al)
- Superior compressive strength (370 MPa)
- Optimized handling and polishability via HD Filler Technology
Clinical Significance
- Allows for single-layer bulk-filling technique –Saves time and money
- Handling and non-stickiness makes placement easy, while ensuring voids are filled
* Varies based on the shade selected.
575 EGP -
Reveal® HD Bulk A1-Bisco-USA
Light-Cured Bulk Fill Composite
REVEAL HD Bulk is BISCO’s new light-cured bulk fill restorative composite, optimized for simpler and faster posterior restorations. REVEAL HD Bulk combines appropriate handling, depth of cure, and polishability, allowing clinicians to provide patients with functional and esthetic composites while saving valuable chair time.
Thanks to its HD Filler Technology, REVEAL HD Bulk allows for layering increments in 5-6 mm due to its predictable depth of cure. BISCO has perfected a filler-resin system refractive index for superior light transmission, which means light can be effectively refracted and distributed through the material, allowing for optimized depth of cure. The category-leading depth of cure allows for a strong restoration from the top-down so you can place the composite in a single-layer without the need for additional layers or placing a base/liner.
Unique Benefits
- Category-leading depth of cure (5-6 mm increments)*
- Exceptional radiopacity (4.0 mm Al)
- Superior compressive strength (370 MPa)
- Optimized handling and polishability via HD Filler Technology
Clinical Significance
- Allows for single-layer bulk-filling technique –Saves time and money
- Handling and non-stickiness makes placement easy, while ensuring voids are filled
* Varies based on the shade selected.
575 EGP -
Modeling Resin-Bisco-USA
Sculpting and Wetting Agent for Composite
Modeling Resin is a light-curable, low viscosity microfilled resin (30% by weight) designed for use as a composite sculpting resin. By wetting your instrument with Modeling Resin, you can facilitate the placement and sculpting of all direct composite restorations without the worries of having the composite stick to the instrument. Unlike adhesives, Modeling Resin contains no solvent and is HEMA-free, so it will enhance composite placement without weakening the restoration620 EGP -
ZirClean®-Bisco-USA
ZirClean is a cleaning gel designed for the non-abrasive cleaning of the bonding surfaces of zirconia (and other prosthetic restorations) after intraoral try-in. ZirClean helps to achieve reliable adhesive cementation results by removing the phosphate contamination of zirconia (as well as ceramic and metal restoration surfaces) that occur during try-in.*
Unique Benefits:
- Delivery system offers improved ease-of-use
- Easy placement and clean up
- Helps achieve reliable adhesive cementation results*
- Contaminants such as saliva can be removed to help achieve better bond strength after try-in*
Clinical Significance:
- The use of ZirClean will help to achieve reliable cementation results with Zirconia restorations after intraoral try-in.*
*As compared to untreated samples. Data on file.
740 EGP -
BisCover™ LV 0.5ml-Bisco-USA
Low Viscosity Liquid Polish
BisCover LV is a low-viscosity, light-cured resin formulation used to seal all your composite restorations while leaving a smooth polished/glazed surface. Due to its unique proprietary chemistry, BisCover LV can be cured using an LED, PAC or halogen curing light in 30 seconds without a sticky oxygen-inhibited layer. BisCover LV is resistant to staining and color shifting resulting in more aesthetic results.Unlike glazing products, BisCover LV can be used inside and outside the mouth to finish direct, indirect and provisional restorations.
Unique Benefits:
- Cures without an oxygen-inhibited layer, resulting in a high gloss surface
- Fully cures with LED, PAC and halogen curing lights
- Reduces or eliminates messy and time consuming manual polishing steps
- Easily seals and protects to prevent microbial attack, prevent staining and increase wear resistance
- Low film thickness eliminates occlusal adjustments
Clinical Significance:
- Unlike glazing products, BisCover LV can be used inside and outside the mouth to leave a dazzling finish
- Can be used on all types of direct, indirect and provisional restorations and appliances
140 EGP -
Etch-37™ w/BAC-Bisco-USA
37% Phosphoric Acid Etchant with Benzalkonium Chloride
Etch-37 w/BAC is a 37% phosphoric acid semi-gel etchant that is effective at quickly etching enamel and dentin. Etch-37 w/BAC is polymer-thickened and effectively removes the smear layer, etches and demineralizes enamel and dentin. It is easily manipulated into small areas such as endodontically treated root canals and undercuts. This makes it more versatile than some thicker gel etchants for etching all restorative surfaces. Published research proves that BISCO etchants produce higher bond strengths to (wet or dry) dentin1 and enamel.- Rinses away cleanly and quickly leaving no residue to interfere with bonding
- Blue in color for easy visualization and contrast
- Creates microretentive surface characteristics that are necessary for successful bonding.
- New bulk syringe delivery system availabl
- Contains benzalkonium chloride (BAC), an antimicrobial agent. In-vitro research shows it is effective against Actinomyces viscosus2.
NOTE: Inclusion of BAC has not been shown to correlate with a reduction in secondary decay in patients. In-vivo clinical studies to evaluate the effects of BAC on oral bacteria or caries have not been performed.
1. Kanca, J.J. “Etchant composition and bond strength to dentin”. Am J Dent 1993;6:162-164
2. Dr. Daniel Chan, University of Texas Health Science Center at San Antonio Dental School. Residual Effect of 1 and 2% Benzalkonium Chloride Incorporated into an Etchant on the Susceptibility of Actinomyces viscosus T14V. 1993500 EGP